Machine-building plant
BONUM – quality, reliability, durability

Semitrailer Grain carrier 914284-02 46-60 m3

Main page » Product catalog » BONUM grain-trailers and semi-trailers » Semitrailer Grain carrier 914284-02 46-60 m3

Semitrailer Grain carrier 914284-02 46-60 m3
46 - 60 cub m
1 pcs
Quantity of compartments
«PRIME System 3S»  
Painting system
from 7 750 kg
Curb weight
Volume 46 - 60 m3
Curb weight  from 7 750 kg*
Axis distance 1310 mm
Maximum gross weight 44 000 kg
Fifth wheel height 1 150 kg
  • Frame made up of two I-beams connected by reinforced cross beams (for difficult road conditions) 09G2C (Russia) / Domex 500 (Sweden)/ Strenx 700 (Sweden)***
  • Two-speed support device with manual one-way drive BPW (Germany) / SAF (Germany) / JOST (Germany) / OMS (Turkey)*** with capacity of 24 t;
  • JOST (Germany) king pin 2" in accordance with UNECE Regulation No. 55.00, located according to ISO 1726;
  • 2 chocks Lokhen (Italy);
  • Spare wheel holder Takler (Italy);
  • Side protection Takler (Italy) (according to UNECE Regulation No. 73.00);
  • Plastic fenders Domar (Italy) above each wheel, a pair of mudguards behind the rear and front axle;
  • Lokhen (Italy) washbasin, with soap dispenser;
  • Toolbox Daken (Italy), with a locking mechanism;
  •  Labelling with improved retroreflective characteristics according to UNECE Regulation No. 48.03;
  •  Attachment brackets on the frame are zinc galvanized***;
  •  Rear aluminium bumper Takler (Italy), with integrated number plate fixing and flashlights, made according to UN ECE Regulations No. 58.01;
  • SAF INTRA CD (Germany) 4x9000 k
Wheels and tires
  • Goodyear / Pirelli*** wheels complete - 9 pcs. (including 1 spare wheel);
  • Tyres dimension 385/65 R22,5;
  • Steel disks  Jantsa/AKO/Hartung*** 11,75 х 22,5;
Brake system
  •    Pneumatic electronic brake system WABCO (Germany)
  •     Membrane-type brake chambers;
  •     Parking brake system, semi-automatic type with spring energy accumulators;
  •     Pneumatic connecting points (supply and control)
  •     ABS socket according to ISO 7638.
  •    WABCO Optilink diagnostic system
Electrical engineering
  • Electrical equipment ASPOECK (Austria). Protection of cables and connectors from chemical and heat exposure, with a voltage of 24 volts;
  • The central 10-core cable with section: 7x1,5 and 3x2,5;
  • Front parking white color lights - 2 pcs;
  • Side position lights - 6 pcs;
  • License plate lights - 2 pcs;
  • Five-chamber rear lamps with reflectors;
  • Contour rear lamps in rubber covers - 2 pcs;
  • Seven-pole connectors - 2 pcs;
  • ​Trailer Body
  •     Steel profiled body with double-sided unloading;
  •     Platform for canopy service with folding ladder;
  •    The stairs are located inside the front wall, ladder inside and outside the rear wall of the body;
  •    Rubber seal around the perimeter of the boards;
  •   Bottom boards on the upper hinge with Suer fittings (Germany);
  •   Steel bracing rods Inside the body;
  •  The middle racks are reinforced from the inside of the body;
Painting System
«PRIME System 3S»

1. Shot blasting of steel surfaces;

2. Zinc-bearing primer coating, premium quality;

3. Painting with two-component polyurethane paint

                                                                                                                                * indicative parameters ***Set according to availability at assembly time

*The design weight of a product is specified, the actual weight can differ slightly.
This offer is for information purposes only and in no conditions can be a public offer defined by the provisions of Article 437 (2) of the Civil Code of Russia. * The producer reserves the right to change without prior notice the list of competing units which does not influence the main technical specifications of a semitrailer truck.
Working process:
1. You can leave your inquiry or call us Leave the inquiry
2. Consulting service
We will carefully listen to your needs and wishes and answer all Your questions. Going forward we are drawing up a commercial offer
3. Initial service
We coordinate details and individual customer requirements with our engineers and set up a contract.
4. Manufacturing process
We manufacture tank semi-trailerson all the rulesand complete them in accordance with customer’s wishes.
5. Delivery
We deliver BONUM tank semi-trailers to required address.